Is Your Suspension System Failing? This Could Be Why...

Is Your Suspension System Failing? This Could Be Why

Control arms, bushings, and ball joints are very important components of the suspension and steering system. These parts allow flexibility and controlled movement over rough road conditions and adjust according to the steering input from the driver. If these parts become worn, they can compromise both handling and comfort, or result in catastrophic damage to your vehicle. Here are a few of the most common symptoms of a problem with your suspension and steering systems — and how to prevent them:


As we talked about in our last article, bushings function similar to cartilage. They cushion the suspension system which, in turn, controls noise and vibrations, and also provide a softer ride over bumps. Just as worn or damaged cartilage results in “bone on bone” contact and discomfort, worn or damaged bushings can allow metal on metal contact. This creates tire wear, discomfort, strange noises, and vibrations. Bushings typically deteriorate due to heat, age, exposure, heavy loads, salt, oils, and the stress of frequent movement.

Ball Joints

Ball joints are another common culprit in failing suspension systems. There is not exact lifespan on sealed ball joints, but they can fail as early as 80,000 miles, or even earlier in some vehicles, depending on your driving style.

Like the ball and socket joint that connects your leg to your hip, a control arm’s ball joint connects and holds the front suspension of your vehicle together. Just like your hip joint facilitates leg movement, a ball joint enables the wheel and suspension to move together in the same manner.

It’s important to watch for signs of ball joint failure and address them in a timely fashion. If a ball joint fails completely it can cause a complete loss of control, putting you and any passengers in serious danger. Typically, the tire will be at an angle, and the vehicle will come to an abrupt halt. This could damage the wheel and tire, other suspension components, and possibly even other parts of the vehicle.

The Signs and Symptoms

There are many signs of a failing ball joint or control arm bushings including:

  • Clicking, popping, or snapping sound when the wheel is turned. Eventually, the clicking and popping can turn into a squeaking sound at the end of a stop, when the gas pedal is used, and/or when turning the steering wheel.
  • A significant shift in the vehicle’s steering alignment, which may cause the steering to pull to the side. This will require constant correction to steer the vehicle straight.
  • Knocking or clunking noises coming from the suspension when going over bumps. The sound will continuously get louder as the component wears or eventually breaks.
  • Worn bushings or ball joints can cause wheel shimmy, which may cause vibrations that are felt in the steering wheel. Vibrations may increase during acceleration and smooth out at higher speeds.
  • Dry ball joints usually have dramatically increased friction and can cause the steering to stick or be more difficult.

It’s important to get a feel for how your vehicle handles, so you can easily detect changes and problems. Taking a quick test drive will allow you to feel for problems on a wide range of driving conditions. Cornering left and right, hitting bumps, and cruising on straight and level ground, both while braking and accelerating, are all important to get a feel for any noises or performance issues related to the control arm assemblies. You can also visually inspect the control arm bushings for cracking, splitting, tears, missing parts, and oil saturation. If you notice any changes in handling, comfort, or appearance you should see your mechanic as soon as possible.

At V&F

It’s best to have control arms, bushings, and ball joints inspected each time you go in for an oil change. Our expert mechanics use latest diagnostic equipment, and high-quality CARQUEST auto parts, to make sure we get the job done right. Plus, our auto repair services are backed by an industry-leading 3 year / 36,000-mile warranty on parts and labor. Call us today at (413) 314-2280 or schedule an appointment online.


Written by Nicole Palange